IBM RS/6000 - Manual (Page 119)

Select the Display Type
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
Graphics Adapter gga
Select the Display Type IBM_P2 +
F1=Help F2=Refresh F3=Cancel F4=List
F5=Reset F6=Command F7=Edit F8=Image
Figure 30. Changing the Display Type
With the cursor over Select the Display Type , you can press F4, and choose from
the following list of display types:
IBM_P50
IBM_P70
IBM_P200
IBM_P201
IBM_14V
IBM_15V
IBM_17V
IBM_14P
IBM_15P
IBM_17P
IBM_21P
POWERdisplay17
POWERdisplay20
Other_HiRes_VESA_Compliant_Multisync_Display
Other_LoRes_VESA_Compliant_Multisync_Display
Each display type will enable different resolutions to be displayed with the graphics
adapter. If your display is not listed, you can choose the Video Electronics
Standards Association (VESA) display options which will allow you to access
resolutions that are supported by your display. If you choose one of the VESA
display options, refer to the manual which came with your display to determine
which resolutions are supported since choosing a resolution which your display
Chapter 5. AIX Version 4.1.4 Support 95