Gateway ALR 7200 - Manual (Page 86)

74 Maintaining and Troubleshooting the Gateway ALR 7200 Server
• Interrupt: displays the current interrupt for integrated Serial
Port B. Using the + or - key displays the optional interrupts
available.
• Parallel Port: allows you to set the characteristics of the integrated
parallel port. Options include
Enabled, Disabled, Auto, and OS
Controlled.
• Mode: displays the current parallel port mode. Options
include
ECP (Extended Capabilities Port), Bi-directional and
Output Only.
• Base I/O Address: displays the base I/O address for the
integrated Parallel Port. Using the + or - key displays the
optional addresses available.
• Interrupt: displays the current interrupt for the integrated
Parallel Port. Using the + or - key displays the optional
interrupts available.
• DMA Channel: displays the current DMA channel used by
the Parallel Port. Using the + or - key displays the optional
channels available.
• Floppy Disk Controller: controls the integrated diskette drive
controller. Options include
Enable and Disable.
• Base I/O Address: displays the base I/O address for the
integrated diskette controller. Options include
Primary and
Secondary.
4077.boo Page 74 Thursday, January 21, 1999 9:48 AM