Replacing the raid cage in the 5.25-inch drive bay – Gateway ALR 7200 User Manual

Page 58

Text mode
Original mode

46 Maintaining and Troubleshooting the Gateway ALR 7200 Server

Replacing the RAID cage in the 5.25-inch drive bay

The Quick Hot-Swap Drive Cage consists of a drive cage, a locking door,
and all the necessary hardware to install it in the system. Each cage
supports three drives. Begin cage installation from the bottom drive bay.

Figure 25: Hot-Swap Drive Cage

Remove the side panel as described in “Removing the side panel” on
page 3.

Disconnect all cables connecting the RAID Cage to other system
components.

Remove the drives:

Pull the latching clips outward to release the drive from the RAID
Cage (see Figure 26).

To replace the RAID cage

4077.boo Page 46 Thursday, January 21, 1999 9:48 AM