Gateway ALR 7200 - Manual (Page 52)

40 Maintaining and Troubleshooting the Gateway ALR 7200 Server
5. Remove the screws securing the drive bracket to the system chassis,
and remove the drive bracket from the chassis. Doing so also removes
the 3.5-inch metal filler panel from the front of the drive bracket (see
Figure 19).
Figure 19: Removing the 3.5-inch Drive Bracket
6. Remove the screws securing the 3.5-inch drive to the bracket, and then
remove the 3.5-inch drive (see Figure 20).
4077.boo Page 40 Thursday, January 21, 1999 9:48 AM