Gateway ALR 7200 - Manual (Page 21)

System Access 9
2. Place the cover straight down on the top of the chassis.
3. Secure the cover with the four screws you removed earlier.
Replacing the bezel
After installing a 5.25-inch device or replacing the 3.5-inch diskette drive,
replace the front bezel before you replace the side panel.
1. Position the bezel to the front of the chassis so that the bezel pegs are
aligned with the mount holes on the front of the chassis. See Figure 5.
Figure 5: Replacing the Front Bezel
To replace the front bezel
4077.boo Page 9 Thursday, January 21, 1999 9:48 AM