beautypg.com

Rd (figure 33) – Gateway ALR 7200 User Manual

Page 66

background image

54 Maintaining and Troubleshooting the Gateway ALR 7200 Server

Figure 33: Installing an Expansion Card

7.

After seating the card firmly, secure it to the chassis by installing the
screw you removed in Step 5 through the mounting bracket at the end
of the card.

8.

If required, connect cables to the card. (See card documentation for
proper jumper settings and cable orientation.)

9.

Close the case, as described in “Closing the system” on page 8.

10.

Reconnect the power cord and turn on the system.

It may be necessary to reconfigure your system after installing some
expansion cards. You may also need to install software that came with the
card. Check the card documentation for additional information.

4077.boo Page 54 Thursday, January 21, 1999 9:48 AM