Gateway ALR 7200 - Manual (Page 22)

10 Maintaining and Troubleshooting the Gateway ALR 7200 Server
2. Insert the bezel pegs into the correct holes at the top of the chassis.
3. Swing the bottom of the bezel forward and press the pegs into the
correct holes, securing the bezel to the chassis.
4. Secure the bezel with the two screws you removed when removing the
bezel.
Replacing the side panel
The final step in closing the system is to replace the side panel.
1. Align the side panel with the ledges on the chassis.
2. Slide the panel toward the front of the chassis (see Figure 6).
Figure 6: Reinstalling the Side Panel
To replace the side panel
4077.boo Page 10 Thursday, January 21, 1999 9:48 AM