Hard disk drive setup screen – Gateway ALR 7200 User Manual
Page 78
66 Maintaining and Troubleshooting the Gateway ALR 7200 Server
Hard disk drive setup screen
The hard disk drive setup screen appears whenever the
Primary Master,
Primary Slave, Secondary Master,
or
Secondary Slave
fields are selected from the
Main menu screen.
Figure 38: Example Hard Disk Drive Setup Screen
•
Type offers the following options:
•
User - selecting this option brings up a submenu where you
can enter the
Cylinders, Heads, Sectors
and
Maximum Capacity
of
the drive you are configuring. These values are generally
available from the documentation for the drive or the drive
label itself.
•
Auto - selecting this option automatically configures the drive
based on information from the drive itself.
•
CD-ROM - select this option if the drive is a CD-ROM.
•
None - “Auto” has been unable to supply the drive type or you
have deliberately selected “None,” disabling any drive that
may be installed.
4077.boo Page 66 Thursday, January 21, 1999 9:48 AM