Gateway ALR 7200 - Manual (Page 30)

18 Maintaining and Troubleshooting the Gateway ALR 7200 Server
• SCAM (SCSI Configured Automatically) Level 1 for Windows
95
® enabling automatic configuration of new devices without
having to reboot the system.
• Wide SCSI configuration supporting up to 15 connected SCSI
peripherals per channel, for a total of up to 30 devices. Up to seven
8-bit devices can be installed on each channel.
• Multithreading support for up to 255 simultaneous I/O tasks
• Advanced SCSI I/O cell ensuring data integrity by automatically
and continuously adjusting slew rate to compensate for SCSI bus
loading
• Driver support for all major operating systems.
Front panel connectors
There are several connectors that provide connection of the front panel
features to the system board. Some of these connectors are redundant,
allowing the front panel features to vary according to the system
requirements and the chassis configuration. Therefore some of these
connectors are not used in the system as shipped.
Reset connector
The reset connector provides the connection of the reset button from the
front cover. This connector is not used in this system.
Front panel connector
The front panel connector provides the signals for the front cover indicator
LEDs and the front cover buttons. This connector is not used in this system.
External HDD connector
The external hard drive connector allows you to connect a cable from an
external hard drive to the system board to allow hard drive activity and
system monitoring to recognize the external drive.
4077.boo Page 18 Thursday, January 21, 1999 9:48 AM