Pyromation Series 610 1_16 DIN - Manual (Page 58)

1 /
4
-DIN, 1 /
8
-DIN & 1 /
16
- DIN Controllers & Indicators - Product Manual
Parameter Lower
Display
Upper Display
Adjustment Range
Default
Value
When
Visible
Setpoint Value
-) Within scale range upper
and lower limits Range
minimum Always
Local Setpoint Value '-)
:'-)
or
* '-)
Within scale range upper
and lower limits.
: or
* before the legend
indicates if this is the
currently active SP
Range
minimum. @C  or
@C
=
+-)
Setpoint 1 Value -)
:-)
or
* -)
Within scale range upper
and lower limits.
: or
* before the legend
indicates if this is the
currently active SP
Range
minimum.
=#
or
=#
=
=-
Setpoint2 Value -)
:-)
or
* -)
Within scale range upper
and lower limits.
: or
* before the legend
indicates if this is the
currently active SP
Range
minimum.
=# or
=#
=
=-
Set-up Lock Code
-' N
0 to 9999 Always
**First Operator mode displays follows.
Note:
Alarm parameters marked * are repeated in Configuration Mode.
Note:
**Once the complete list of Set Up Mode parameters has been displayed, the first
Operator Mode display is shown without exiting from Set Up Mode. Display seen is
dependant on the Display Strategy and status of Auto/Manual mode selection.
59305, Issue 6 – March 2006
P6100, P6120, P8100 & P4100 Model Group Page 53