IDEC MicroSmart Pentra - Manual (Page 84)

C ONFIGURING PID M ODULE USING W IND LDR
F C5A MicroSmart PID Module User’s Manual FC9Y-B1283 6-19
PID Module Configuration - Program Parameters List (CH0 and CH1)
Program parameters for CH0 and CH1 are described here.
Control Registers
Offset from
the control
register
Parameter Description R/W
CH0 CH1
(1) +180 +390 Set Point (SP)
When input is thermocouple/resistance thermometer:
Set point (SP) lower limit to set point (SP) upper limit
When input is voltage or current:
Linear conversion min. to linear con- version max.
R/W
(2) +181 +391 Step Time
When step time unit is Minute:
0 to 6000 minutes
When step time unit is Second:
0 to 6000 seconds
R/W
(3) +182 +392 Wait Value
When input range unit is Celsius:
0 to 100°C
(Range with a decimal point: 0.0 to 100.0°C)
When input range unit is Fahrenheit:
0 to 100°F
(Range with a decimal point: 0.0 to 100.0°F)
When input is voltage or current:
0 to 1000
R/W
(4) +183 +393
Proportional Band/
Proportional Gain
Proportional band:
When input range unit is Celsius:
0 to 10000°C
(Range with a decimal point: 0.0 to 1000.0°C )
When input range unit is Fahrenheit:
0 to 10000°F
(Range with a decimal point: 0.0 to 1000.0°F)
When input is voltage or current:
0.0 to 1000.0%
Proportional gain:
0.00 to 100.00%
R/W
(5) +184 +394 Integral Time 0 to 10000 sec R/W
(6) +185 +395 Derivative Time 0 to 10000 sec R/W
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)