IDEC MicroSmart Pentra - Manual (Page 11)

G ENERAL I NFORMATION
1-2 FC 5A MicroSmart PID Module User’s Manual FC9Y-B1283
Applicable CPU and WindLDR version
PID modules can be used with the following FC5A CPU module system program version and WindLDR version
as listed below.
Type All-in-One Type Slim Type
FC5A MicroSmart CPU
FC5A-C10R2
FC5A-C10R2C
FC5A-C10R2D
FC5A-C16R2
FC5A-C16R2C
FC5A-C16R2D
FC5A-C24R2D
FC5A-C24R2
FC5A-C24R2C
FC5A-D16RK1
FC5A-D16RS1
FC5A-D32K3
FC5A-D32S3
FC5A-D12K1E
FC5A-D12S1E
CPU System Program Version 230 or higher *1
WindLDR Version 6.40 or higher
*1: The PID module can be used with FC5A-D12K1E/-S1E with the system program version 100 or higher.
Confirming System Program Version
The system program version can be confirmed using WindLDR.
1. Connect a PC to port 1 or 2 of the FC5A CPU using serial computer link cable I/F (FC2A-KC4C) or USB
cable HG9Z-XCM2A for FC5A-D12x1E CPU.
2. From the WindLDR menu bar, select Online > Monitor.
3. From the WindLDR menu bar, select PLC > Status. The PLC Status dialog box appears and system
program version is shown.