IDEC MicroSmart Pentra - Manual (Page 76)

C ONFIGURING PID M ODULE USING W IND LDR
F C5A MicroSmart PID Module User’s Manual FC9Y-B1283 6-11
Input Parameters List when External SP Input is Selected
Control Registers
Offset from
the control
register
Parameter Description R/W
(1) +55
Input Range
(External SP input)
0: Disabled (Note)
1: 4 to 20mA DC
2: 0 to 20mA DC
3: 1 to 5V DC
4: 0 to 1V DC
5: Cascade control (Note)
Note: Disabled and Cascade control cannot be selected
in the input range.
R/W
(2) +139 PV Correction -1000 to 1000 R/W
(3) +140 PV Filter Time Constant 0.0 to 10.0 sec R/W
(4) +178
External SP Input Linear
Conversion Maximum
Value
External SP Input linear conversion min. to input range
upper limit of CH0
R/W
(5) +179
External SP Input Linear
Conversion Minimum
Value
Input range lower limit of CH0 to external SP input linear
conversion max.
R/W
(6) +177 External SP Input Bias ±20% of the external SP input linear conversion span R/W
(7)
+142 Alarm 1 Type 0: No alarm action
1: No alarm action
2: No alarm action
3: No alarm action
4: No alarm action
5: Process high alarm
6: Process low alarm
7: No alarm action
8: No alarm action
9: No alarm action
R/W
+143 Alarm 2 Type
+144 Alarm 3 Type
+145 Alarm 4 Type
+146 Alarm 5 Type
+147 Alarm 6 Type
+148 Alarm 7 Type
+149 Alarm 8 Type
(8)
+114 Alarm 1 Value
See page 6-10 for the detail about alarm value range. R/W
+115 Alarm 2 Value
+116 Alarm 3 Value
+117 Alarm 4 Value
+118 Alarm 5 Value
+119 Alarm 6 Value
+120 Alarm 7 Value
+121 Alarm 8 Value
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8) (9) (10)