IDEC MicroSmart Pentra - Manual (Page 15)

M ODULE S PECIFICATIONS
2-4 FC5A MicroSmart PID Module User’s Manual FC9Y-B1283
General Specifications
Type No. FC5A-F2MR2 FC5A-F2M2
Connector
Connector on
Mother Board Input : F6018-17P (Fujicon)
Output : F6018-11P (Fujicon)
Connector
Insertion/Removal
Durability
Input Specifications
Type No. FC5A-F2MR2 FC5A-F2M2
Maximum Error at 25°C
Thermocouple ±0.2% of full scale or ±2°C (4°F),
whichever is greater
However, R, S inputs, 0 to 200°C (0 to 400°F):
±6°C (12°F)
B input, 0 to 300°C (0 to 600°F): Accuracy is
not guaranteed.
K, J, E, T, N inputs, Less than 0°C (32°F):
±0.4% of full scale
Resistance
Thermometer ±0.1% of full scale or ±1°C (2°F), whichever is
greater
Voltage, Current ±0.2% of full scale
Input Accuracy (at 0 to 55°C)
Thermocouple ±0.7% of full scale
However, R, S input, 0 to 200°C (0 to 400°F):
±6°C (12°F)
B input, 0 to 300°C (0 to 600°F): Accuracy is
not guaranteed.
K, J, E, T, N inputs, Less than 0°C (32°F):
±0.9% of full scale
Resistance
Thermometer ±0.6% of full scale
Voltage, Current ±0.7% of full scale
Data Accuracy Maximum error at 25°C±Minimum digital resolution of each input range
Cold Junction Temperature
Compensation Accuracy ±1°C at 0 to 55°C
Sampling Period 125 ms
Output Specifications
Type No. FC5A-F2MR2 FC5A-F2M2
Control Output
Relay output 1a
Rated load:
5A 250V AC (resistive load)
5A 30V DC (resistive load)
3A 250V AC (inductive load
cos φ=0.4)
Non-contact voltage (for SSR drive)
12V DC±15%
Current :
4 to 20mA DC
Program Control Specifications
Type No. FC5A-F2MR2 FC5A-F2M2
Time Setting Accuracy ±0.5% of setting time
Progressing Time Error
After Power is Restored Maximum 6 minutes
Non-volatile Memory
Write Limit 1,000,000 times