IDEC MicroSmart Pentra - Manual (Page 72)

C ONFIGURING PID M ODULE USING W IND LDR
F C5A MicroSmart PID Module User’s Manual FC9Y-B1283 6-7
PID Module Configuration Dialog Box
The buttons in the PID module configuration dialog box are described.
Buttons
Button Description
(1) OK All parameters are saved and the dialog is closed.
(2) Cancel All changes made to the parameters are discarded and the dialog is closed.
(3) Write All Parameters
Current parameters configured in the PID Module Configuration dialog box
are written to the data registers (RAM) in the CPU module and the PID
module.
(4) Upload All Parameters
All parameters stored in the PID module mounted on the slot selected in the
Expansion Modules Configuration dialog box are read, and all parameters in
the dialog box are updated.
(5) Monitor
The PID module mounted on the slot selected in the Expansion Modules
Configuration dialog box can be monitored.
(1)
(2) (3) (4) (5)