HP XU - Manual (Page 91)

English 75
3 Troubleshooting Your PC Workstation
Using HP MaxiLife to Diagnose Problems
Using HP MaxiLife to Diagnose Problems
Your HP LCD can help you to diagnose problems with your PC
Workstation, even when you are unable to get your system and monitor
working properly.
Pre-Boot Checks When you press your PC Workstation’s on/off button, HP MaxiLife will
check your system before it initiates the start-up sequence. You will see
one of the following screens on the LCD as these checks progress:
HP KAYAK XU
Error!
Power supply
Check processor 2 VRM
installation. Check system board. Flash new BIOS.
Check processor 1 VRM
installation.
Check memory installation.
Check that a CPU or terminator
is installed in the CPU slots Check power supply and
power cable connections.
Error!
Power CPU 1
Error!
Power CPU 2
Error!
Board PLL
Error!
BIOS
Error!
No RAM
No errors occurred during pre-
boot. POST is initiated.
Error!
CPU Socket
Note: Some error
messages displayed here
may not be available. Error!
RAM type
Error!
No Video
Check that installed RAM
types are compatible. Check that graphics card
is installed correctly.
crystal.bk : cryst-3.fb4 Page 75 Monday, March 23, 1998 4:09 AM