HP XU User Manual
Page 127
English
111
4 Technical Information
Configuring a SCSI Accessory
•
Plug and Play Scam Support
When enabled, this option automatically configures Plug and Play
compatible SCSI devices. For SCSI devices that do not support Plug
and Play, set this option to
Disabled
. By default, it is enabled.
•
Extended BIOS Translation for DOS Drives >1 GByte
This option is no longer used (and must always be “Enabled”).
•
Reset SCSI Bus at IC Initialization
When the SCSI controller receives an IC Reset command from the
central processor, it can reset either itself and the SCSI bus, or just
itself. By default, it will reset both itself and the SCSI bus.
•
Host Adapter BIOS
This option enables or disables the SCSI Adapter BIOS. Several
options in SCSISelect utility are only valid if the SCSI adapter BIOS
is enabled. The SCSI adapter BIOS must be enabled if the computer
boots from a SCSI hard disk drive. This option is enabled by default.
•
Support Removable Disks Under BIOS as Fixed Disks
When
Boot Only
is selected, only the removable media drive
designated as the boot device is treated as a hard disk drive.
If
All Disks
is selected, all removable-media drives supported by
the BIOS are treated as hard disk drives. No removable-media drives
are treated as hard disk drives when
Disabled
is selected. In this
case, removable-media drives must be controlled through operating
system drivers.
•
Display
When enabled, this option displays the message
Press
SCSISelect(TM) Utility
during BIOS initialization. When
disabled, this message is not displayed, although you can still press
the
key for the SCSISelect utility. This option is enabled by
default.
•
BIOS Support for Bootable CD-ROM
When enabled, this option provides BIOS support for booting from a
CD-ROM drive. It is enabled by default.
•
BIOS Support for Int13 Extensions
When enabled, this option provides BIOS support for hard disk
drives with more than 1024 cylinders. It is enabled by default.
crystal.bk : cryst-4.fb4 Page 111 Monday, March 23, 1998 4:09 AM