HP XU - Manual (Page 138)

4 Technical Information
Using the ArrayConfig Program
122 English
Using the ArrayConfig Program
You can use the ArrayConfig
TM
program to:
• Create a new array, and
• Manage existing arrays on your system’s hard disk drives.
Creating a New Array
Before you create a new array, you will need to do the following:
❒ Back up any existing data that you wish to save on your hard disk
drives. Once the drives have been configured and the operating
system re-installed, you can restore your backed up data.
❒ Create a bootable floppy from the HP Kayak XU/XW PC Workstation
Drivers CD-ROM provided with your system.
You can create a new array using either of the following options.
Express Setup - use this option if you want to create an array (up to
two drives) quickly and easily. ArrayConfig asks you a few simple
questions and uses your answers to create the kind of array that best
meets your needs. This process is similar to the “Wizards” used in
many applications. You do not need to know the technical details of
how arrays are configured. Refer to "Using Express Setup" on page
123.
Custom Setup - this option allows advanced users to create arrays
(with more than two drives) with customized configurations. You
will need to know more technical details about how arrays are
configured to benefit from this option. Refer to "Using Custom
Setup" on page 125.
NOTE
Your computer will attempt to boot from a non-SCSI disk (for example,
an IDE drive) if one is installed. To boot from the FastRAID array, either
disable or remove any non-SCSI disks on your computer before running
the ArrayConfig utility or ensure that the Array 1000 adapter is set to
the highest priority in the Setup program (
Boot>Boot Order ).
crystal.bk : cryst-4.fb4 Page 122 Monday, March 23, 1998 4:09 AM