HP XU - Manual (Page 122)

4 Technical Information
Configuring a SCSI Accessory
106 English
The Options menu is displayed.
Use the and keys and the key to make selections in
the SCSISelect utility. Press at any time to return to the previous
menu.
Configure/View
Interface Settings Menu It is recommended that you do not change these settings.
SCSISelect(TM) Utility v1.xxx
Would you like to configure the host adapter, or run the
SCSI disk utilities? Select the option and press .
Press to switch between color and monochrome modes.
Options
Configure/View Host Adapter Settings
SCSI Disk Utilities
Arrow keys to move cursor, to select option, to exit
SCSISelect(TM) Utility v1.xxx
Configuration
SCSI Bus Interface Definitions
Host Adapter SCSI ID . . . . . . . . . . . . . . 7
SCSI Parity Checking . . . . . . . . . . . . . . Enabled
Additional Options
Boot Device Options . . . . . . . . . . . . . . Press
SCSI Device Configuration . . . . . . . . . . . Press
Advanced Configuration Options . . . . . . . . . Press
- Reset to Host Adapter Defaults
BIOS Information
Interrupt (IRQ) Channel . . . . . . . . . . . . . . 15
I/O Port Address . . . . . . . . . . . . . . . . . F800h
crystal.bk : cryst-4.fb4 Page 106 Monday, March 23, 1998 4:09 AM