beautypg.com

HP XU User Manual

Page 48

background image

2 How to Install Accessories Inside Your PC Workstation

Installing Memory

32

English

4 Remove the fan connection to the system board and lift the airflow

guide completely out of PC Workstation’s case.

5 Remove the Ultra wide 16-bit SCSI cable from the system board.

6 Remove the power supply and the transparent airflow guide covering

the processor sockets (if needed).

7 Remove the floppy disk drive data cable from the system board.

8 The location of the memory module slots is shown here.

crystal.bk : cryst-2.fb4 Page 32 Monday, March 23, 1998 4:09 AM

This manual is related to the following products: