HP XU - Manual (Page 45)

English 29
2 How to Install Accessories Inside Your PC Workstation
Moving the Power Supply
Moving the Power Supply
You can slide the power supply unit out of the computer to improve
access to the system board and the cables at the rear of the disk drives.
1 Disconnect the computer’s power cord and any telecommunications
cable.
2 Remove the computer’s cover (see page 25).
3 Press the retaining buttons on each side of the HP UltraFlow airflow
guide and lift it partly out of the PC Workstation’s case.
4 Remove the fan connection to the system board and lift the airflow
guide completely out of PC Workstation’s case.
5 Unscrew the four self-retaining screws at the back of the power
supply.
HP UltraFlow
Airflow Guide
Retaining button
Fan connection to
system board
Unscrew the
self-retaining screws
crystal.bk : cryst-2.fb4 Page 29 Monday, March 23, 1998 4:09 AM