HP XU - Manual (Page 65)

English 49
2 How to Install Accessories Inside Your PC Workstation
Installing Mass Storage Devices
10 Remove the plastic panel from the cover by pulling the panel from
the left and unhinging its right-hand side. Store the panel in a safe
place.
11 Install any other accessories before replacing the cover and
completing the installation.
Completing the Installation of a Drive
When an IDE CD-ROM
Drive Is Installed 1 Switch on the computer and press when Setup appears.
2 In the Setup program, select the Advanced menu, the IDE Devices
submenu. Check that the CD-ROM drive has been detected on the
IDE channel.
3 Press to save and exit the program.
When a Flexible Disk
Drive Is Installed 1 Switch on the computer and press when Setup appears.
2 In the Setup program, select the Advanced menu, the Flexible Disk
Drives submenu, and check that the drive has been detected.
3 Press to save and exit the program.
Unclip and lift out
the plastic panel
crystal.bk : cryst-2.fb4 Page 49 Monday, March 23, 1998 4:09 AM