HP XU - Manual (Page 129)

English 113
4 Technical Information
Configuring a SCSI Accessory
Using the SCSI Configuration Utility
The Symbios Logic SCSI Configuration Utility lets you view and change
the default configuration for your host adapter and all SCSI devices
connected to it, or for individual SCSI devices.
Default Settings You Can Change
The following two tables show the configuration settings you can
change. The first table shows the global settings which impact your
host adapter and all SCSI devices connected to it. Be very careful if you
change any of these settings. The second table shows the device
settings which apply to individual devices.
Settings for the Host Adapter and All Devices Default Settings
SCAM Support On
Parity Enabled
Host Adapter SCSI ID 7
Scan Order Low to High (0-Max)
Removable Media Support None
Settings for Individual SCSI Devices Default Settings
Synchronous Transfer Rate (MB/sec) 40
Data Width 16
Disconnect On
Read Write I/O Timeout (secs) 10
Scan for Devices at Boot Time Yes
Scan for SCSI LUNs Yes
Queue Tags Enabled
crystal.bk : cryst-4.fb4 Page 113 Monday, March 23, 1998 4:09 AM