HP XU - Manual (Page 27)

English 11
1 Setting Up and Using Your PC Workstation
Starting and Stopping Your PC Workstation
• The current date and time.
• The type of printer (for example, HP LaserJet 5L). This is shown
on the front of the printer. You also need to enter the connection
used by the printer.
3 While the initialization program is running, you can complete the
Warranty Registration card that came with this manual.
4 When the initialization routine has finished, click OK and the
PC Workstation will restart.
Creating Back-up Diskettes
It is very important that you create master diskettes for your preloaded
application software and as an Emergency Repair Disk for the
operating system, as soon as possible. HP recommends that you use
new diskettes for this purpose. To create these back-up diskettes,
follow the instructions that appear on screen when you first start your
PC Workstation.
For more information on how to create these diskettes, refer to the
documentation that came with your application software or operating
system.
Starting Your PC Workstation
1 Before you start your PC Workstation, first switch on the display.
2 Start your PC Workstation in one of these ways:
• Press the power button on the front panel.
• Press the keyboard space bar.
The keyboard power-on feature will work only if Space-bar is
enabled in the Power menu of the Setup program (refer to page
101) and the system board switch 8 (KEYB power) is DOWN (the
default setting). Refer to page 99 for more information on system
board switches.
crystal.bk : cryst-1.fb4 Page 11 Monday, March 23, 1998 4:09 AM