HP XU - Manual (Page 133)

English 117
4 Technical Information
Configuring a SCSI Accessory
Adapter Setup Menu
When you select Adapter Setup from the Adapter Utilities menu, the
Adapter Setup menu is displayed:
The settings in this menu are global settings that effect the selected
host adapter and all SCSI devices attached to it.
SCAM Support The Symbios Logic BIOS version 4.x and above supports the SCSI Plug
and Play protocol called SCAM (SCSI Configured AutoMatically). You
can turn this off if you wish.
Parity Symbios Logic PCI to SCSI host adapters always generate parity, but
some SCSI devices do not. For this reason you can disable parity
checking.
NOTE
When disabling parity checking, you may have to disable disconnects for
certain devices as parity checking for the re-selection phase is not
disabled. If a device does not generate parity, and it disconnects, the I/O
never completes because the re-selection never completes.
Symbios Logic SCSI Configuration Utility
Version 1.07
1. SYM53C875
Adapter Setup
SCAM Support On
Parity Enabled
Host SCSI ID 7
Scan Order Low to High (0..Max)
Removable Media Support
CHS Mapping
Help.
Restore Default Setup.
Exit this menu.
Use arrow keys to select from menu. Then press ENTER
BIOS Code Segment: C800
crystal.bk : cryst-4.fb4 Page 117 Monday, March 23, 1998 4:09 AM