HP XU - Manual (Page 24)

1 Setting Up and Using Your PC Workstation
Connecting the Power Cords
8 English
Connecting the Power Cords
1 Remove any warning labels that may be covering the computer’s
power connector on the rear of the computer.
2 Connect the power cords to the display and the computer. (The
connectors are shaped to go in one way only.)
3 Connect the display’s power cord and the computer’s power cord to
grounded outlets.
WARNING
For your safety, always connect the equipment to a grounded wall
outlet. Always use a power cord with a properly grounded plug, such
as the one provided with this equipment, or one in compliance with
your national regulations. This PC Workstation is disconnected from
the power by removing the power cord from the power outlet. This
means the PC Workstation must be located close to a power outlet that
is easily accessible.
Monitor Power Connector
PC Workstation
Power Connector
Grounded Outlet
crystal.bk : cryst-1.fb4 Page 8 Monday, March 23, 1998 4:09 AM