HP XU - Manual (Page 64)

2 How to Install Accessories Inside Your PC Workstation
Installing Mass Storage Devices
48 English
7 Locate the appropriate data cable for the device.
8 Connect the data and power cables to the rear of the device. (The
connectors are shaped to go in one way only.)
9 Slide the power supply back into position, and tighten the four self-
retaining screws (see page 30).
IDE drives should be connected to a
free IDE connector on the IDE cable
(you can add up to two IDE devices).
Wide SCSI devices should be
connected to a free SCSI connector
on the SCSI cable (you can add up
to five SCSI devices).
Narrow SCSI devices should be
connected to a free SCSI connector on
the SCSI cable (you can add up to two
SCSI devices).
Up to 13 external SCSI devices can be
connected via the external SCSI
connector.
Power Cable
Data Cable
crystal.bk : cryst-2.fb4 Page 48 Monday, March 23, 1998 4:09 AM