HP XU User Manual
Page 44
2 How to Install Accessories Inside Your PC Workstation
Removing and Replacing the Cover
28
English
4 Lower the latches on the front sides of the cover.
5 If required, lock the cover using the key provided.
6 Reconnect all the power cables.
Intrusion Monitor
Your PC Workstation is equipped with an intrusion monitor, which is
located on the front of the PC Workstation, behind the Hardware
Control Panel. It is designed to detect whether your PC Workstation
has been opened since the last time it was used:
•
If your PC Workstation has been opened, it is assumed that the
system configuration has changed and a full start-up check is carried
out.
•
If your PC Workstation has not been opened, it is assumed that the
system configuration has not changed and a reduced start-up check
is carried out.
crystal.bk : cryst-2.fb4 Page 28 Monday, March 23, 1998 4:09 AM