HP XU User Manual
Page 59
English
43
2 How to Install Accessories Inside Your PC Workstation
Installing Mass Storage Devices
Installing a Hard Disk Drive in a Front-Access Shelf
NOTE
To ensure your hard disk drive is properly located and cooled, you
should only install drives that are up to one inch (1”) in height and of a
speed equal to or less than 7200 rpm in this shelf.
1 Disconnect the computer’s power cord and any telecommunications
cable.
2 Remove the computer’s cover (see page 25).
3 Remove the fan connection to the system board (see the illustration
on page 29).
4 Press the retaining buttons on each side of the HP UltraFlow airflow
guide and lift it out of the PC Workstation’s case.
5 Slide out the power supply to provide better access to the disk drive
cables (see page 29).
6 Unscrew and remove an unused drive tray.
Remove the
drive tray
crystal.bk : cryst-2.fb4 Page 43 Monday, March 23, 1998 4:09 AM