PLANET DSP-1000 - Manual (Page 98)

- 98 -
1. Send the getfiles command to create the index. Depending on
the capacity and amount of files, this might take several seconds.
2. The index will be stored in a text file “DSPfiles” in the root
directory “/DSPfiles”.
3. Download the “DSPfiles” text file to your computer and open it
with a text editor.
4.8.5 Creating a delete list
To remotely erase files on the local drive, create a new text file called
“delete.lst”. Fill in the path and file name to your files which you like to
delete or use “*” to erase all content.
1. Create a new text file and name it “delete.lst”.
2. Add the path to your files on the local HDD. One file per line.
3. Make sure to add one empty line at the end of the list.
4. Save the file on your local drive.
5. Upload the file to the DSP-1000 via TFTP or HTTP/FTP
download function and execute it by sending the delfiles
command.
NOTE:
Only English characters are supported and there should not
be any special characters or empty spaces in the path. Make