PLANET DSP-1000 User Manual
Page 118
- 118 -
When downnow is used, files are downloaded according to the
down.lst list. The download path is irrelevant, as it will only look for
the down.lst list on the local drive.
Q13
I can’t enter the firmware update or configuration menu
because it starts to play?
Ans:
Stop playback, go to the setup menu and turn off the playlist or
repeat mode. Exit the setup menu and you are able to use the
power button and the key combination 1234 or 1111 to enter the
firmware update or configuration menu.
Q14
Is there a limit for the file names and length of the path or
playlist?
Ans:
Yes, the maximum is 120bytes per line, 2000 lines per file, 70bytes
per file name and 30bytes for the path in the playlist.
Q15 How reset machine to factory default settings?
Ans:
Press the “Setup” button from remote controller and get into Setup
Menu, go to the MISC2 category and select default option from
“Setup Value” menu. All of settings will restore to factory default
immediately.
Q16
Why I always stay at Library menu, and can’t entry Main Menu
to update firmware from my storage device by manually?
Ans:
Press the “Setup” button from remote controller and get into Setup
Menu, to setup the below option:
MISC1: Play list -> Off
MISC2: Play Mode -> Standard
Press the “Setup” button from remote controller again to leave
Setup Menu, it will stay at Main Menu. Cooose the “Firmware”
icon and storage device (HDD/PC/USB), and refer to
from user’s manual for detail information to update
firmware by manually.