PLANET DSP-1000 User Manual

Page 75

- 75 -

7. In

the

NETWORK category, you have two locations (PC1 & PC2)

where you can add the shared folders. Press Enter to setup the

file path.

8. Enter

the

IP address of your computer plus the directory and

save it. As seen in step 4, the name for the shared folder in this

example is 123, so the input for the directory path here would

therefore be 123.

9. In order for these changes to take effect, exit the Setup menu and

reboot the device immediately.

10. After rebooting, you can access the remote folder through your local

network. Go to the file library and access the files in PC1 or PC2.