PLANET DSP-1000 - Manual (Page 28)

- 28 -
3.5 Audio & Video Category
In this category, you can configure the audio and video output of your
DSP-1000. Use the arrow keys on your remote control for navigation and
the ENTER button to configure the settings.
1 SPDIF
Depending on the audio cable you are using, set this
to Analog if you are using the simple RCA left/right
audio cables or to Digital if you are using the optical
SPDIF cable.
2 Speakers
Depending on your speaker set up, set this to 2
Channels if you are only using 2 speakers or to 5.1
Channels if you are using digital audio with 5 speakers
and surround sound.
3 TV Standard
Select your TV system from the list. You can choose
either NTSC or PAL.
4 TV Type
Select the aspect ratio for your TV (4:3 Letter Box, 4:3
Pan-Scan, and 16:9).
5
Video
Connector
Depending on the A/V cable you are using, select the
corresponding connection from the list. For the
standard Composite cable, choose C/S-Video and for
the Component cable, choose YPbPr. Also available
are VGA and HDMI.