PLANET DSP-1000 - Manual (Page 76)

- 76 -
NOTE:
If the permission level of the guest account is set to its default
level Read, the DSP-1000 can still access the files but will not
be able to erase the remote commands on its own. We
therefore strongly recommend using Contributor or Co-owner.
4.2.3 LAN Disk
Instead of a local computer, you can also store the content on a network
drive with SMB server such as Planet’s LAN disk for example. No
computer is needed for this setup, as the LAN disk can be accessed
directly via local network.
1. Set up a shared SMB folder on the LAN disk (example here Æ 123).
2. Write down the IP address of your LAN disk. You will need to
enter this IP in step 7.
NOTE: DO NOT enter any passwords for SMB folders.
3. Make sure the LAN disk is running, the folders are set up and it is
connected to the same local network as your DSP-1000.
4. On the DSP-1000, press SETUP on your remote control to enter