PLANET DSP-1000 - Manual (Page 54)

- 54 -
possible from the outside. Commands can be sent via the PC
utility or via command console.
4.1.1 Disk Management
To manage the data on the local hard drive and to update the files with
new content, access the file copy and erase command in the MISC2
category.
All File Copy
1. Press the SETUP button and go to All File Copy in the MISC2
category.
2. Choose one of the functions and press ENTER to start the copy
process.
3. The copy status will be displayed on screen and once finished,
it will return to the main screen.
NOTE:
Only files in the root directory will be copied. Any existing files
with the same file name will be overwritten. To copy single
files or sub-folders, use the SELECT button on the remote
control, select the file and press the button to copy the file.