PLANET DSP-1000 - Manual (Page 62)

- 62 -
8 config Restores
settings
according to the
config.conf file
If set to 1, it will download the
configuration file (config.conf)
and restore the settings
according to that file. Store the
config.conf file in the same
location as the update.dsp file.
Note : If both FWupdate and config are enabled, it will first upgrade the
firmware and then restore the settings according to the config.conf file. If the
volume is set via update.dsp and config, the one in the config.conf file will
be used.
NOTE:
Make sure the last character on the line is 1 or 0 and NOT and
empty space! If set to 0 or if there is no such command in the
update.dsp file, that file or command will be ignored. If set to
1, it will download and execute that file or command. The Skip
function of the download mode will be overwritten for the files
included in the update.dsp list.
4.1.4 Creating the Download List
If the down.lst in the update.dsp list is enabled, the DSP-1000 will
download the new content according to the download list. Create a new
text file called “down.lst”, add the URL to the media files to be
downloaded and store it on your server (same location as update.dsp).
1. Create a new text file and call it “down.lst”.
2. Add the URL to the multiple playlists as well as the media files,
followed by a space and the path to define the directory where the
new files are to be stored. Use the IP address and the complete
address, one file per line.