PLANET DSP-1000 - Manual (Page 82)

- 82 -
3 Date
Plays according to the date. Stops at the library screen
if no playlist is found. No limitation for the amount of
playlists. Requires playlist based on date
(20070101.lst).
4 Date&Time
Plays according to date & time. Defaults to title.lst if a
gap in the time exists. Maximum of 24 playlists per
day. Requires title.lst and playlist based on date & time
(20070101_0900_1800.lst).
5 Repeat
Automatically plays all compatible media files found in
the root directory of the internal drive and any attached
USB drive. Repeats them continuously. Requires
media files on either the internal drive or USB drive.
6 Standard
Files are accessed via remote control. There is no
automatic playback and the device behaves like a
standard media player. Requires media files on a
HDD, a USB drive or a shared folder via SMB.
7 Manual
Plays 000 file at start up. Plays 001-999 AVI files after
the users input via remote control and automatically
returns to 000 file. Requires 000.avi or 000.jpg &
000.mp3 plus AVI video clips from 001-999.
8 Standby
Plays 000 file at start up. Plays 001-999 AVI files after
the users input via remote control and waits for further
input. Requires 000.avi or 000.jpg & 000.mp3 plus AVI
video clips from 001-999.
4.5 Playlist
The DSP-1000 supports LST playlists, to be played back automatically at
boot up or at a certain date and time. To enable this function, select one of
the playlist modes from the list and set the path to your playlist.
1. Press SETUP on your remote control to enter the DSP-1000’s
setup menu.
2. In the MISC2 category, make sure the play mode is set to
Standard.
3. In the MISC1 category, select one of the playlist modes.