PLANET DSP-1000 User Manual
Page 95
- 95 -
upload.lst file.
5
erasehdd
This command will erase all files stored on the local
drive or CF card.
6 eraseusb1
This command will erase all files stored on the
attached USB drive on port 1.
7
eraseusb2
This command will erase all files stored on the
attached USB drive on port 2.
8 delfiles
This command will erase all files listed in the
delete.lst file.
9
getfiles
This command will create a file index of the current
files on the local HDD.
10 restoreconfig
This command will upload the new settings from the
config.conf file.
11
saveconfig
This command will save the current settings to a
config.conf file.
12 osd_on This command will turn the on-screen messages ON.
13
osd_off
This command will turn the on-screen messages
OFF.
14 scrolling_on
This command will turn the scrolling text message
ON.
15
scrolling_off
This command will turn the scrolling text message
OFF.
16 refreshcontent
This command will refresh the playlist and file
content.
17
fwupdate
This command will upgrade the firmware using the
latest version on the drive.
These commands can be sent to the DSP-1000 via network connection
(TFTP) by using the command console or the PC utility (Configuration
Tool).
NOTE:
For more details to TFTP and the Configuration Tool, please
refer to the Appendix.