PLANET DSP-1000 - Manual (Page 24)

- 24 -
1 Date Time
Displays current date and time. If the time or date is not
correct, make sure you have selected the correct time
zone, choose another NTP server, ensure that your
internet connection is working or set it manually. Reboot
after changing the NTP server.
2 Time Zone
Select the time zone of your country. If you do not know
the time offset, refer to your PC clock. Double click on
the time in the taskbar and go to Time Zone. Select your
country from the list and you will see the corresponding
time offset.
3 NTP Server
Select one of the NTP servers from the list or enter the
IP address manually to synchronise the time via the
internet. Turn it OFF if you don’t need this function.
4 Play List
To enable this function, select one of the playlist modes
from the list. Once it is enabled, you can set the path to
your playlist. Reboot the unit and make sure the
corresponding playlist is stored in the right location to
start using the playlist mode.