Solare Datensysteme Solar-Log User Manual
Page 98
98
Configuring connected devices
18�5�5 Configuring IDM Heat Pumps
IDM heat pumps can be selected from the drop-down menu from the Device Configuration menu and con-
figured accordingly.
Procedure:
•
Select the IDM heat pumps from the drop-down menu under devices.
•
Select the operating mode from the meter configuration menu.
•
Configure the device.
•
SAVE
the settings.
The following configuration options are available for the operating mode.
Operating modes:
•
Inverter mode and Meter for the entire plant
•
Group selection for PM control with self-consumption.
•
Module field
•
Generator Power [Wp]
•
Name
•
Consumption meter mode:
•
Group selection for PM control with self-consumption.
•
Maximum AC power
•
Name
•
Sub-consumption meter mode:
•
Maximum AC power
•
Name