Solare Datensysteme Solar-Log - Manual (Page 12)

12
Updating from Firmware 2.x to 3.x
3 Updating from Firmware 2�x to 3�x
The following note is for the Solar-Log 200, 500 and 1000 models when updating to firmware version 3.x.
In order to update to 3.x, the Solar-Log™ must at least be running firmware version 2.x. The latest firmware
can be downloaded from our website:
http://www.solar-log.com/de/service-support/firmware.html.
Note
After installing firmware 3.x, it is no longer possible to downgrade to the previous ver-
sions. It is not possible to install older firmware versions.
The following changes occur when upgrading to 3.x:
•
The data transfer function is no longer available.
•
The Smart Home / Smart Energy section has been completely revised. If the function External
Switch (only Solar-Log 1000) is used, this part needs to be reconfigured after the update.
•
The settings and function of the power management have to be checked and, if need be, reconfig-
ured.
•
The new modern web interface may cause compatibility problems with older browser versions. We
recommend using the latest version of "Mozilla Firefox," "Google Chrome" or "Microsoft Internet
Explorer."
As part of the update, the Solar-Log™ has a data reformatting process running in the background. This
process starts once the update is finished. This process could last several hours and the Solar-Log™ will
operate and react slower until the update finishes.