Solare Datensysteme Solar-Log - Manual (Page 124)

124
System Configuration
Automatic time synchronization section
To automatically synchronize the system time, the Solar-Log™ regularly contacts a network time protocol
(NTP) server.
If the Solar-Log™ is connected to the Internet via a router, the synchronization occurs during the night.
With a GPRS connection, the time synchronization occurs during a data transfer.
Procedure
•
Activate the Automatic time synchronization button
•
SAVE settings.
Update now function, the time synchronization with the NTP server can be manually started. The NTP port
123 needs to be enabled in the gateway or firewall.
22�3 Display
The following options are available from the Configuration | System | Display menu:
•
Power off display
•
Dimming function for the display
•
Slide show
The settings refer to the touch display. The small LCD display is continuously in operation.
Dimming at a certain time
The display brightness can be limited to a certain period. If the display is touched, the screen lights up
again.
Procedure
•
Enter the Turn on at and Turn off at time
Times are to be entered in the hh:mm format
For example: 7:30 PM
•
SAVE settings.
Dimming when all of the inverters are offline
When this function is active, the Solar-Log™ automatically dims when all of the inverters are offline (no
more power feed). The Solar-Log automatically resumes from the sleep the next morning and starts re-
cording again.
Dimming after inactivity
The display brightness can be dimmed by 50% and/or 100% after a certain period. If the display is touched,
the screen lights up again completely.
Procedure
•
Activate Dimming level switch.
•
Enter the Period of inactivity in minutes on the display
The minutes are to be entered in the mm format.
For example, 35 for 35 minutes
•
SAVE settings .