Solare Datensysteme Solar-Log - Manual (Page 201)

201
Faults
29 Faults
29�1 Restarting and resetting
29�1�1 Reset buttons
Effects of reset button:
•
Device is restarted (reset)
•
Factory settings are restored
The reset button is located on the top of the housing.
If the cover is in place, it must be removed to allow access to the reset button.
Fig.: Reset buttons
29�1�2 Reset
A reset is necessary if Solar-Log™ is no longer responding to inputs from control buttons or from the PC.
All settings made on the unit are maintained, as well as all data collected during run-time.
Note
If the IP address is changed, Solar-Log™ restarts automatically when the new
address is saved.