Volatile waveform – RIGOL DG1000Z Series User Manual

Page 75

RIGOL

DG1000Z User’s Guide

2-25

Volatile Waveform

Press Arb  Select Wform  Volatile Wform to select arbitrary waveform
currently stored in the volatile memory. If there is no waveform data in volatile

memory currently, this menu would be unavailable. At this time, you can fill up the

volatile memory through the methods below.

1. Fill up the volatile memory with the waveform currently edited through Edit

Wform.

2. Press Arb  Edit Wform  Data Src to select “CH1 Arb”、”CH2 Arb” or “Vol”.

Then copy the currently selected arbitrary waveform of CH1 or CH2 or the

waveform of the other channel’s volatile memory to the volatile memory of the

currently selected channel.

When “Volatile Wform” is selected, users can edit the volatile waveform using the

Edit Wform menu. The new waveform data will overwrite the previous data in the

volatile memory. You can also save the new volatile waveform in non-volatile

memory.