RIGOL DG1000Z Series - Manual (Page 160)

RIGOL Chapter 2 Front Panel Operations
2-110 DG1000Z User’s Guide
Front Panel:
Status Indicator
Power: red light on, indicating successful power connection.
Output: green light on, indicating that PA output is turned on.
Link: yellow light on, indicating successful USB connection.
CAUTION
The input impedance of the instrument Zi is 50kΩ, and the range of
voltage is from -10V to +10V or form -1.25V to +1.25V separately while
the voltage gain is set to X1 or X10.
Inputs that exceed these ranges may cause damages to the instrument or
other hazards.
CAUTION
The output impedance of the instrument Zo is less than 2Ω, and the range
of output voltage is from -12V to +12V. Although the amplifier actually
enables to output voltages up to ±12.5V, the total wave harmonic
distortion may increase.
Status Indicator Signal Output Signal Input