RIGOL DG1000Z Series - Manual (Page 70)

RIGOL Chapter 2 Front Panel Operations
2-20 DG1000Z User’s Guide
Built-In Waveform
DG1000Z has 160 built-in arbitrary waveforms as shown in Table 2-2. Press Arb 
Select Wform  BuiltIn to enter the built-in waveform selection interface as
shown in the figure below. Press Engine, Medical, AutoElec or Maths to select
the corresponding item (each item has one or more sub-items). Press the
corresponding menu key repeatedly to switch to the desired sub-item (the selected
sub-item in the sub-item bar is highlighted) and rotate the knob to select the desired
waveform (the selected waveform is highlighted). Then press Select to select the
waveform which is highlighted.
Figure 2-5 Built-in Waveform
Table 2-2 160 Built-in Arbitrary Waveforms
Sub-item Waveform Explanation
Engineering
Normal
Sinc Sinc function
Lorentz Lorentz function
Log Logarithm function and the base is 10
GaussPulse Gauss pulse
NegRamp Negative ramp
NPulse Negative pulse
PPulse Positive pulse
SineTra Sine-Tra waveform
SineVer Sine-Ver waveform
StairDn Stair-down waveform
StairUD Stair-up and stair-down waveform
Sub-item Bar
Built-In
Waveform
Item
Menu
Number of Current Page/
Total Number of Pages
Number of Current Waveform/
Total Number of Waveforms