RIGOL DG1000Z Series - Manual (Page 178)

RIGOL Chapter 5 Specifications
5-4 DG1000Z User’s Guide
FSK
Carrier Waveform
Sine, Square, Ramp, Arb (except DC)
Source Internal/External
Modulating Waveform Square with 50% duty cycle
Key Frequency
2mHz to 1MHz
PSK
Carrier Waveform
Sine, Square, Ramp, Arb (except DC)
Source Internal/External
Modulating Waveform Square with 50% duty cycle
Key Frequency
2mHz to 1MHz
PWM
Carrier Waveform
Pulse
Source Internal/External
Modulating
Waveforms
Sine, Square, Ramp, Noise, Arb
Width Deviation 0% to 100% of Pulse Width
Modulating Frequency 2mHz to 1MHz
[Mod/Trig/FSK/Sync] Input
Input Range
75mVRMS to ±5Vac+dc
Input Bandwidth 50kHz
Input Impedance 1000Ω
Burst Characteristics
Carrier Waveform
Sine, Square, Ramp, Pulse, Noise, Arb (except DC)
Carrier Frequency 2mHz to 30MHz 2mHz to 60MHz
Burst Count 1 to 1,000,000 or Infinite
Start/Stop Phase 0° to 360°
Internal Period 1us to 500s
Gated Source External Trigger
Trigger Source Internal, External or Manual
Trigger Delay 0ns to 100s
Sweep Characteristics
Carrier Waveform
Sine, Square, Ramp, Arb (except DC)
Type Linear, Log or Step
Direction Up/Down
Start/Stop Frequency Consistent with the upper/lower limit of the frequency of
the carrier waveform
Sweep Time 1ms to 500s
Hold/Return Time 0ms to 500s
Trigger Source Internal, External or Manual
Mark Falling edge of the Sync signal (programmable)