RIGOL DG1000Z Series - Manual (Page 23)

Chapter 1 Quick Start RIGOL
DG1000Z User’s Guide 1-5
Front Panel Overview
The front panel of DG1000Z is shown below. Click the numbers in the figure to view
the corresponding description.
16 15 14 13 12 11 10
1 2 3 4 5 6 7 8 9
Figure 1-1 Front Panel
1. Power Key
The power key is used to turn the generator on or off.
2. USB Host
Support USB storage device, RIGOL TMC digital oscilloscope (DS), power
amplifier (PA) and USB to GPIB interface converter (Option).
 USB storage device: read the waveform or state files saved in the USB
storage device or store the current instrument states or edited waveform
data into the USB storage device. In additional, the content displayed on
the screen also can be saved as a picture file (*.Bmp) into the USB storage
device.
 TMC DS: seamlessly interconnect with the RIGOL DS that meets the TMC
standard. Read and store the waveform data collected by the DS and rebuilt
waveform losslessly.
 PA (option): support the RIGOL power amplifier (such as PA1011). You
can configure it online and the signal is outputted after whose power is
amplified.
 USB to GPIB interface converter (Option): expand the GPIB interface for
RIGOL instrument with USB Host interface but without GPIB interface.