RIGOL DG1000Z Series - Manual (Page 47)

Chapter 1 Quick Start RIGOL
DG1000Z User’s Guide 1-29
Installation Procedure
CAUTION
Only authorized operators can execute the installation operation. Improper
installation might result in damage of the instrument or incorrect
installation of the instrument on the rack.
1. First remove the handles of the two instruments (hold the handles by sides of
the instrument and pull them outward). And then remove the four rubber pads
on the front and rear panel of the two instruments respectively.
2. Fix one fixing part on the right side of the front panel of the instrument A using
two M4 cross recessed pan head screws. Fix the connector A on the left side of
the front panel of the instrument A using two M4 cross recessed countersunk
head screws.