Eicon Networks 1530 User Manual
Page 86
Web Interface Settings Glossary
86
Protocol Menu (VHSI Tree) (when protocol is set to
X.25)
These parameters are only available when the protocol is set to X.25.
Node Type
Defines if the Eicon 1530 functions as DTE (Data Terminal Equipment) or DCE (Data-Circuit
terminating Equipment). Consult your network subscription for the proper setting
Default: DTE.
• DTE: Use when connected to an X.25 network, or to another computer configured as DCE.
• DCE: Use when connected to another computer configured as DTE.
Local DTE Address
Defines the X.25 DTE address assigned to the Eicon 1530.
Range: 0-15 digits.
Default Window Size
Defines the default X.25 window size.
Range: 1-7. Default: 2.
Maximum Window Size
Defines the maximum X.25 window size.
Range: Default window size to 7. Default: 7.
Packet Format
Defines the type of packets supported. Consult your network subscription to see if you can
make use of Extended Packet features. This parameter affects Window size.
• BASIC: Supports only the standard packets used on all networks.
• EXTENDED: Supports the use of extended clearing, call user data, and other features available
only on certain networks.
Default Packet Size
Defines the default X.25 packet size.
Range: 64-1024 bytes. Default: 128 bytes.
Maximum Packet Size
Defines the maximum X.25 packet size.
Range: Default packet size to 1024 bytes. Default: 256 bytes.